wapoyoc475

To connect the LED daytime running lights (LED strips) on your '96 Passat headlights so that they turn on when you turn the key, you can follow these steps: Locate the ignition switch wiring: Find the wiring harness that connects to the ignition switch in your vehicle. This harness carries the electrical power needed for various components when the key is turned. Tap into the accessory power source: Identify the wire within the ignition switch wiring that supplies power when the key is in the "on" or "accessory" position. This wire provides the desired power source for your LED daytime running lights. Use a wire tap or splice connector: Once you've identified the appropriate wire, use a wire tap or splice connector to connect the positive (red) wire from your LED strips to the accessory power wire. This connection will ensure that the LED lights receive power when the key is turned. Connect the negative (black) wire: Connect the negative wire from your LED strips to a suitable ground point on the vehicle's chassis. This completes the electrical circuit and allows the lights to function properly. Test the installation: After making the connections, turn the key to the "on" or "accessory" position to see if the LED daytime running lights turn on. If they do, congratulations! Your installation was successful.