Jump to content
Sjxristos

Καλημέρα Κ Καλός Τα ...

By Sjxristos, in Problems

Recommended Posts

Sjxristos VWClub Member

Sjxristos

Posted
Posted

Sunday,02,March,2014,00:41:14:26365
VCDS Version: Release 805.0

                Address 01: Engine
Control Module Part Number: 03C 906 032 A
  Component and/or Version: MED17.5.1       G   9971
           Software Coding: 0000072
            Work Shop Code: WSC 66565
3 Faults Found:

049441 - Can't Decode, CODE File Not Loaded! 
               U0121 - 000 - Can't Decode, CODE File Not Loaded! - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 0 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Load: 0.0 %
                    Speed: 0.0 km/h
                    Temperature: 71.0°C
                    Temperature: 27.0°C
                    Absolute Pres.: 980.0 mbar
                    Voltage: 12.065 V

005699 - Can't Decode, CODE File Not Loaded! 
               P1643 - 000 - Can't Decode, CODE File Not Loaded! - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 4
                    Mileage: 128493 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 22:31:09

             Freeze Frame:
                    RPM: 1313 /min
                    Load: 6.3 %
                    Speed: 33.0 km/h
                    Temperature: 87.0°C
                    Temperature: 15.0°C
                    Absolute Pres.: 970.0 mbar
                    Voltage: 14.224 V

000010 - Can't Decode, CODE File Not Loaded! 
               P000A - 000 - Can't Decode, CODE File Not Loaded! - MIL ON
             Freeze Frame:
                    Fault Status: 11110000
                    Fault Priority: 0
                    Fault Frequency: 6
                    Mileage: 128563 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 07:14:22

             Freeze Frame:
                    RPM: 3022 /min
                    Load: 7.1 %
                    Speed: 93.0 km/h
                    Temperature: 88.0°C
                    Temperature: 15.0°C
                    Absolute Pres.: 940.0 mbar
                    Voltage: 13.970 V


Readiness: 0000 0001

 

τι νάνε αυτά??

Link to comment
Share on other sites
nikoskallithea VWClub Member

nikoskallithea

Posted
Posted

Το λαθος "CODE File Not Loaded!" εχω την εντύπωση οτι εχει σχεση με την βερσιον του καλωδίου σου και δεν μπορει να διαβάσει το αυτοκίνητο ή διαβάζει αλλα αντι αλλων.

  • Like 1
Link to comment
Share on other sites
nikdev VWClub Member

nikdev

Posted
Posted

Το καλωδιάκι σου αρχίζει τα τρελά του σιγά σιγά..

Link to comment
Share on other sites
Sjxristos VWClub Member

Sjxristos

Posted
  • Author
Posted

το πάλεψα λίγο χθες και το έφτιαξα το καλώδιο τελικά!!!

Λοιπόν τι είναι αυτά ??? έψαξα και στο site  αλλά δεν ..  :sorry:

 

Address 01: Engine
Control Module Part Number: 03C 906 032 A
  Component and/or Version: MED17.5.1       G   9971
           Software Coding: 0000072
            Work Shop Code: WSC 66565
2 Faults Found:
 
012296 - Camshaft Position Sensor (G40): Signal Out of Range 
               P3008 - 000 -  -  - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 128596 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 07:44:56
 
             Freeze Frame:
                    RPM: 757 /min
                    Load: 9.0 %
                    Speed: 0.0 km/h
                    Temperature: 87.0°C
                    Temperature: 16.0°C
                    Absolute Pres.: 960.0 mbar
                    Voltage: 14.097 V
 
005699 - Please check DTC Memory of Electric Load Controller 
               P1643 - 000 -  -  - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 3
                    Mileage: 128609 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 15:08:52
 
             Freeze Frame:
                    RPM: 1205 /min
                    Load: 22.0 %
                    Speed: 17.0 km/h
                    Temperature: 60.0°C
                    Temperature: 21.0°C
                    Absolute Pres.: 960.0 mbar
                    Voltage: 14.224 V
 
Address 19: CAN Gateway
Control Module Part Number: 1K0 907 530 K
  Component and/or Version: J533__Gateway   H04 0021
           Software Coding: 7D0F034007000000
            Work Shop Code: WSC 01279
2 Faults Found:
 
01305 - Databus for Infotainment 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 1
                    Fault Frequency: 24
                    Reset counter: 62
                    Mileage: 128588 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 07:29:23
 
01044 - Control Module Incorrectly Coded 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 1
                    Fault Frequency: 9
                    Mileage: 128588 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 07:29:22
Monday,03,March,2014,19:10:53:26365
VCDS Version: Release 805.0
 
να σημειώσω ότι έχω το ράδιο (οθόνη κινεζάκι) + kufatec e mfa για έξτρα ενδείξεις 
Link to comment
Share on other sites
rivol VWClub Member

rivol

Posted
Posted

 Στο  address 19 can gateway  τα σφάλματα είναι απο το κινεζάκι πάντως :)

Link to comment
Share on other sites
nikoskallithea VWClub Member

nikoskallithea

Posted
Posted

012296 - Camshaft Position Sensor (G40): Signal Out of Range (Αισθητήρας θέσης εκκεντροφόρου)

 

Αυτο ειναι σοβαρο να πας να το δουνε, καδενα ή αισθητηρας, δεν σου εχει αναψει λαμπακι?

Link to comment
Share on other sites
PiNiOn VWClub Member

PiNiOn

Posted
Posted

Για καδένα σε βλέπω..αλλά τσέκαρε και τον αισθητήρα καλού-κακού (αν έχεις έναν δεύτερο είναι υπόθεση 1 λεπτού).

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
nikdev VWClub Member

nikdev

Posted
Posted

ναι μου έχει ανάψει :(

ο G40 που βρίσκεται μπας και τον καθαρίσω κ γίνει τίποτα???

Στα ειπα...

Αλλα...

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
Sjxristos VWClub Member

Sjxristos

Posted
  • Author
Posted

τον έβγαλα τον καθάρισα αλλά πάλι το ίδιο, λαμπάκι ανάβει αλλά το αμάξι δουλεύει κανονικότατα τι να πω...

Link to comment
Share on other sites
Sjxristos VWClub Member

Sjxristos

Posted
  • Author
Posted

το έκανα το βγάζει ξανά , από βδομάδα έχουμε επισκευή , πρώτα αισθητήρα αν φταίει αυτό αλλιώς μετά καδένα τεντωτήρα 

θα δείξει... 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept